We had our ZineFest! Having the students sign their own work and hand it out to their peers was very exciting for them. We went around collecting zines from each author. We hope this small taste of authorship will continue to inspire and motivate the students to create something that means something to them.
After our successful mini-ZineFest, the students could participate in two mentor-led sessions: toy-takeapart, or finger-puppets. We also allowed students to just draw or continue with some of the projects from the previous weeks. Toy-takeapart continues to be an engaging project for students to work on as they puzzle over what’s inside their toys and how to make progress. Finger-puppets were a relaxing way to create small, inexpensive items for the students. We continued toy-takeapart the next week for those that didn’t get a chance to participate, and we also added crochet for those that found finger-knitting to be the most engaging.
Finally, we experimented with adding a couple of computers set up to use Michigan ZOOMin, a Zooniverse project by a professor at University of Michigan that can help students learn about Michigan wildlife by identifying pictures of deer, bears, raccoons, and other wildlife from trap cameras set up around the state. This Citizen Science project helps students take part in real research and learn about animals along the way. We had a few students take part in this and they identified over 50 pictures!
Our next two weeks saw Sarah and Tori taking more initiative by taking on their own projects. We gave the students one more option this time: finger-knitting (with Tori), flashlights (with Ben), or felt pillows (with Sarah). Organizing the zines took longer than we thought it might, but stay tuned for the ZineFest next week!
The students were able to pick a project and complete it — or sometimes move onto another one. With around 8-9 kids per project, it became a little difficult to go through the step-by-step instructions of many of our projects. The students showed a lot of patience in waiting for a mentor’s attention, and we even had a few students who were able to help their peers. In the future, we had a little bit more of a lesson at the beginning and that helped a lot.
This semester at Mitchell we had two new helping hands, Sarah and Tori! With four pairs of hands, we thought we might introduce Sarah and Tori as helpers first on two projects, zines (which we had been excited about for a while, and Sarah had experience in) and boardgames (which Ben really digs as a means to collaboration and choice for the students).
So we split the students up into two groups and had one group work on zines this week, and the other on designing boardgames in groups of two or three. The following week, the groups switched. If they finished early they could work on engineering toys or other items that we had brought in.
Over the two weeks we had a lot of zines made that were very thoughtful and described what the students were interested in. Some used some Ed Emberly books to enhance their drawing skills, but some created stories of their cats or about their interest in soccer. The boardgames also turned out well, as students were encouraged to use only the materials that were presented to them in a small ziploc bag. We were happy to get Tori and Sarah used to how Michigan Makers worked by using familiar projects!
For the last session at Scarlett before winter break, the activity was designing our own mugs. Each student was given a IKEA mug and access to several colors of the oil based paint sharpies. Small slips of paper had the baking instructions so that students with the help of an adult could bake the design onto the mug so that it would not rub off with everyday use and washing.
Many of the students created christmas themed designs they planned on giving as gifts to friends and family. While most of the designs were hand drawn, one students used stencils to create a stop sign. Her idea was to create an image and word that would prevent her family from using her mug.
One problem that arose was how to fix any mistakes on the mugs. The sharpies were fairly permanent so any mistake had to be quickly wiped away with an alcohol wipe. Sometimes being creative or accepting the mistakes was easier than correcting them. This forced the students to be intentional with their choices as well as accepting of any small mistakes that occured.
At Scarlett Middle School today the students were tasked with creating a Puppet Show from scratch. The students had a cardboard stage, fabric, junk boxes, and their creativity at their disposal to create everything they needed for their show.
Using toy parts, felt and other scraps of fabric each student created unique puppets. The students did not do much planning and preferred to jump right in to making the puppets. This allowed each puppet to be fully unique, however, they soon discovered that sometimes what seems like a great idea for a character might not be conducive to a 3D puppet. The students spent time troubleshooting how to get their floppy but pretty puppet to stand vertically. Straws, popsicle sticks and glue seemed to be the method of choice to support the puppets.
When it came to the stage, the students used fabric and other fun materials to drape over the stage and the area in front of it to create scenery. This was done instead of coloring or drawing on the stage. The effect was magically, however, like with the puppets the cardboard stage could not support all of the weight so it was back to problem solving and figuring out how to have a decorated stage that could stand up straight under the weight. The students used some of their books from school to prop up the stage from behind carefully making sure it was not visible from the front.
The last step was to bring all the pieces together to put on the show. There was no real planning of dialogue or action. It was definitely an improv session. The students took inspiration from shows and movies they loved as well as conversations they had in real life with friends and family for their shows. They were definitely unique!
We were grateful to finally return to Mitchell Elementary — and to be back in the gorgeous library which gave us more room to work with than the creativity-inspiring art room — in the third week of November. We had scheduled four weeks to work with the students with a break for Thanksgiving, but we ended up getting the first snow day of the year on our final gift-giving blowout meeting! Read up a little below on what we did and learned throughout the three fall sessions…
Diverging from our typical route of having (too?) many stations, we decided to try to have one large-group activity. The first week we went with our tried-and-true favorite: toy takeapart. The main reason we love this activity so much is it engages the most reluctant third grade students. Over the semesters, we’ve been adjusting simple things here and there about how we present the activity and how we monitor the students learning. We are also always searching for the perfect toy. This particular iteration featured a few too many smaller toys with specialty screws. Our librarian host and some parents who came early even stepped in during the waning minutes trying to help the students with pesky screws — we eventually discovered some of the thread on the plastic part had been eroded!
The second week we had plans to have the students make felt finger puppets using hand-sewing techniques and then design a short play that could be performed for the other students. We added the decoration of the stage as an extendable way for the students to further realize their designs. Our trustworthy junk box became the primary fodder for students to enhance their stage sets (made out of cardboard boxes). Students also created different mechanical set-ups attached to the stage to create both a stand for a soccer goal to sit on, and a way to have curtains be raised at the beginning of the play.
During the third week, we finished up puppets, stages, and plays, and finally had multiple groups show off their plays as their classmates looked on.
Things were a little different today at Scarlett Middle School. For the activity we brought a littlebits R2D2 Droid Inventor kit for the students to build and explore with. The kit worked with an app that gave step by step instructions on how to build and test the droid.
The instructions were easy enough to follow without too much adult input and the students really enjoyed putting the parts together and testing each addition as they were added. One limit of this activity is that is something that can only be done in small groups. It was easy for people to get left out or to take over the building process. Emphasis on teamwork was necessary to keep everyone equally involved.
Once the droid was built the students were able to complete quests and challenges on the app. One challenge was to build a obstacle course and then using the app steer the droid through the books, boxes, bags and other obstacles in the way. There was definitely a learning curve with the controls. It was not as easy as it looked. Other future challenges included placing a pen in a loop on the back of the droid and using a large sheet of paper to create designs with the droids movements. It will be fun to see what possibilities the droid has in the future.
Today was a day to bring an old Michigan Makers favorite to Scarlett Middle School. Toy Take Apart! After getting the students geared up in goggles and gloves, they were handed screwdrivers, pliers and any tool they might need and a box filled with old toys.
Toy take apart is always a mix of curiosity, fun, and patience. Removing dozens of screws can test anyone’s patience, but nothing is more satisfying than removing the last screw and seeing what is inside of the old toy. One student spent her day taking apart an animatronic dog toy. Nothing brought her more joy and creeped everyone else out more than seeing the dog without any of its fur. It’s white plastic casing looking more alien than dog like. One student turned an old frog clock into a vase for fake flowers, really pushing the limits of what old toys can be used for.
To wrap up the day students were able to use their personal favorite tool – the button maker. The students love taking old magazines and looking for cool pictures or patterns to create into pins for their bags or magnets for their lockers.
Today at Scarlett Middle School only one student came for Michigan Makers. With only one student the focus was on direct one on one interaction which worked out for the activity. Today we learned how to backstitch. In previous weeks we tried cross stitch but it was not the best activity for the time constraints. With back stitching an image can be created in both a simpler and quicker way. Backstitching is a way to make a solid line of thread on an embroidery project, unlike the patchy line created by the classic running stitch. Using a pencil the student drew out her initial and a heart on the fabric. With some instruction and encouragement she was able to slowly trace the design with her thread and create a patch that with iron on Heat and Bond she can with her parents help iron on the design to a backpack or other approved fabric object.
Since today is the week before Halloween we decided to do a fun activity with the students at Scarlett Middle School. It is time for Clothing Hacks! We brought several large IKEA blue bags filled to the brim with donated and thrifted clothing. With two sewing machines, scissors and creativity students were able to create their own new clothing or costume pieces for Halloween, if they celebrated. One student took the sleeves from a plaid button down and added it to a Teenage Mutant Ninja Turtles t-shirt, giving the shirt a new look. Another student took light blue kids clothing and turned them into leg warmers. There was no shortage of creativity today.
One of the most elaborate projects involved almost no sewing. Using black clothings and accessories from the bags one student turned a “Happy New Year” hat into a witches hat. The biggest problem she had to solve was how to get all of the items to attach without visible tape. It took a little bit of creativity since she was not using the sewing machines to help.
At the end of the day each student had something they had made to take home and we had what could only be described as a literally explosion of fabric everywhere. Sometimes creativity is a messy process and there is nothing better than accepting and living with that fact.